Flush Mount Trim Ring - DKS 1803 Owner's Manual

1.1.5 Flush Mount Trim Ring (use with 1803 and 1810 units only)
Flush mount units can be mounted by using the 1814-065 (stainless) or 1814-066 (gold) mounting kit.
Flush mounting kits are not included with the unit. Flush mount units are not designed for direct
exposure to the weather. Be sure the unit is mounted securely and is not subject to vibration from
closing doors or gates.
CAUTON! If this entry system is used to control a vehicular gate with an automatic gate operator, the
entry system must be mounted a minimum of ten (10) feet away from the gate and gate operator, or
in such a way that a person cannot operate the entry system and touch the gate or gate operator at
the same time.
2.625
.25 DIA
1.25 DIA
14.25
9.0
1.25 DIA
3.0
5.875
3.0
7.0
8.5
11.75
14
3.625
Rough-in Trim Flush Mount
Box Ring Entry System