Flash Entry Codes - DKS 1803 Owner's Manual

3.4.5 Flash Entry Codes

This programming sequence sets up "FLASH" four-digit entry codes. Flash codes are entry codes
that will operate on a specific day of the month only - they will not operate before or after the
programmed day. The flash code will be valid for a single 24-hour period only. For example, if you
program a flash code on July 1st to be active on the 10th, the code will become valid at 00:00 AM on
July 10th and expire at 11:59 PM. The code will not be valid on August 10th. You can program up to
eight flash codes in the system. Flash codes 1 through 4 will activate relay 1, flash codes 5 through 8
will activate relay 2.

1. Press
2. Enter the flash code number (1 - 8)
3. Enter the day of the month that the code is to be active
4. Enter the four-digit FLASH ENTRY CODE
5. Repeat steps 2 through 4 to enter additional flash codes.

6. Press TOGETHER to end this programming step (beeeeeep).
and enter the four-digit MASTER CODE
B
BBBB
then press (beep).
BB
then press
BBBB
then press
39
(beep).
(beep).
(beep).