1.6
Flush Mount Trim Ring (use with 1803 and 1810 units only)
Flush mount units can be mounted by using the 1814-165 (stainless) or 1814-166 (gold) mounting kit.
Flush mounting kits are not included with the unit. Flush mount units are not designed for direct
exposure to the weather. Be sure the unit is mounted securely and is not subject to vibration from
closing doors or gates.
WARNING! If this entry system is used to control a vehicular gate with an
automatic gate operator, the entry system must be mounted a minimum of
ten (10) feet away from the gate and gate operator, or in such a way that a
person cannot operate the entry system and touch the gate or gate operator
at the same time.
Flush Mount Trim Ring (P/N 1814-165 and 1814-166)
1.250
1.250 DIA (3 PL)
Page 16
14.700
10.120
.286 DIA (4 PL)
1.250 DIA (3 PL)
3.000
3.000
3.100
4.505
12.200
3.100
Title:
Date:
3.450
DOORKING, INC., INGLEWOOD, CA 90301
Flush Mount Trim Ring
D
4/11
Dwg. No.
M1800-065-5
Rev.
1800-060-S-3-14