Installing The Driver For Windows Ce; Determining Windows Ce Version And Processor Type - Cisco AIR-PCM342 Hardware Installation Manual

Installing the Correct Driver

Installing the Driver for Windows CE

Note

Determining Windows CE Version and Processor Type

Step 1
Step 2
Step 3
Step 4
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
3-18
Windows CE devices do not support PCI client adapters.
The driver installation instructions vary depending on which version of Windows
CE you are running, and the files you install vary depending on your device's
processor. To determine the Windows CE version and the processor type, follow
the instructions in the "Determining Windows CE Version and Processor Type"
section below.
Perform one of the following:
• If your Windows CE device is a pocket PC (ppc) device, select Start >
Settings > the System tab > About. The Windows CE version and the
processor type are displayed. Go to Step 4.
If your Windows CE device is a hand-held (hpc) device, select Start >
•
Settings > Control Panel > System. Go to Step 2.
In the System Properties window, select the Device tab. The processor type is
displayed (such as MIPS 4000 Family).
Select the System tab. The core system version indicates the version of Windows
CE that the device is running (such as 2.11).
For Windows CE 2.11, go to the "Windows CE 2.11" section on page 3-19.
For Windows CE 3.00, go to the "Windows CE 3.00" section on page 3-21.
Chapter 3 Installing the Client Adapter
OL-0795-01