Cisco AIR-PCM342 Hardware Installation Manual page 67

Chapter 3 Installing the Client Adapter
Double-click the Macintosh HD icon on the desktop. The Macintosh HD window
Step 20
appears.
Double-click the Cisco pcm3x0 Folder icon. The Cisco pcm3x0 Folder window
Step 21
appears.
Step 22 Double-click the pcm3x0PPC icon. The Cisco pcm3x0 window appears, and the
computer searches for the client adapter. After the adapter is found, the Cisco
pcm3x0 - Basic Properties window appears.
Under Radio, make sure that radio status is on. If it is off, click the Turn radio
Step 23
on button.
Perform one of the following:
Step 24
•
•
Step 25 Type your RF network's (case-sensitive) SSID in the SSID dialog box.
Step 26 Click OK.
Eject the CD by clicking the CD icon on the desktop and dragging it to the trash
Step 27
can.
The driver and client utility installation is complete. Refer to the Cisco Aironet
Step 28
Wireless LAN Adapters Software Configuration Guide for instructions on how to
use the client utility.
OL-0795-01
If your computer is in an infrastructure network, select Computer to base
station in the Network subwindow.
If your computer is in a peer-to-peer (ad hoc) network, select Computer to
computer in the Network subwindow.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
Installing the Correct Driver
3-29