Cisco AIR-PCM342 Hardware Installation Manual page 61

Chapter 3 Installing the Client Adapter
The Cisco Wireless LAN Adapter Settings dialog box appears.
Step 11
•
•
Select Start > Programs > Cisco > Aironet Client Utility to open the Aironet
Step 12
Client Utility (ACU).
Select Client Name under Property. Type your Windows CE device's unique
Step 13
client name in the Value dialog box.
Step 14 Select SSID under Property. Type your RF network's case-sensitive SSID in the
Value dialog box.
Step 15 Select Data Rates under Property. Make sure Auto is selected in the list of
options in the Value dialog box.
Step 16 Click OK.
The driver and client utility installation is complete. Refer to the Cisco Aironet
Step 17
Wireless LAN Adapters Software Configuration Guide for instructions on how to
use each utility.
OL-0795-01
If you are connected to a DHCP server, select Obtain an IP address via
DHCP or Use server-assigned IP address and click OK.
If you are not connected to a DHCP server, select Specify an IP address or
Use specific IP address and follow the steps below:
Enter the IP address, subnet mask, and default gateway address of your
a.
computer (which can be obtained from your system administrator).
Select the Name Servers tab and enter the primary and secondary DNS
b.
and WINS for your computer (which can be obtained from your system
administrator).
c. Click OK.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
Installing the Correct Driver
3-23