Removing The Driver For Windows 2000 - Cisco AIR-PCM342 Hardware Installation Manual

Chapter 4 Troubleshooting and Routine Procedures

Removing the Driver for Windows 2000

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
OL-0795-01
Make sure the client adapter is installed in your computer. Otherwise, Windows
cannot find the adapter to remove it.
Double-click My Computer, Control Panel, and Add/Remove Hardware.
In the Add/Remove Hardware Wizard window, click Next.
Click Uninstall/Unplug a device. Click Next.
Click Uninstall a device. Click Next.
From the Devices list, select the Cisco Systems wireless LAN adapter. Click
Next.
Click Yes, I want to uninstall this device. Click Next.
Click Finish.
Open Windows Explorer.
Click Tools, Folder Options, and View.
Under Hidden files and folders, make sure Show hidden files and folders is
selected. Click OK.
Go to C:\Windows\Inf and double-click the oemx.inf and oemx.pnf files, where x
equals a numeral, to open them.
Delete the oemx.inf and oemx.pnf files that are labeled Cisco.
Go to C:\Windows\System32\Drivers and delete the pcx500.sys file.
Shut down your computer.
Remove the client adapter.
Turn your computer back on.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
Removing the Driver
4-15