Installing The Driver For Windows 98 - Cisco AIR-PCM342 Hardware Installation Manual

Chapter 3 Installing the Client Adapter
Step 21
Step 22
Step 23

Installing the Driver for Windows 98

Note
Step 1
Step 2
Step 3
Step 4
OL-0795-01
If you are not connected to a DHCP server, double-click My Computer, Control
Panel, and Network. Select TCP/IP -> Cisco Systems Wireless LAN Adapter.
Click the Properties button, select Specify an IP address, and enter the IP
address, subnet mask, and default gateway address of your computer (which can
be obtained from your system administrator). Click OK.
In the Network window, click OK.
When prompted to restart your computer, click Yes.
The driver installation is complete.
Windows 98 limits your computer's network connections to eight. If
you try to install a client adapter when eight network devices (such
as a PCMCIA Ethernet card, dial-up adapter, VPN adapter, docking
station Ethernet card, etc.) are already connected to your computer,
the new adapter cannot establish a network connection.
If your computer's operating system is Windows 98, follow these steps.
After you insert the client adapter into your computing device, Windows
automatically detects it, briefly opens the New Hardware Found window, and
starts collecting information for a driver information database.
The Add New Hardware Wizard dialog box opens and indicates that Windows is
searching for new drivers.
Click Next. Another dialog box opens and asks what you want Windows to do.
Select Search for the best driver for your device (Recommended) and click
Next.
Select CD-ROM drive, deselect all other options, insert the Cisco Aironet Series
Wireless LAN Adapters CD into your computer's CD-ROM drive, and click
Next.
The hardware wizard finds the installation files on the CD and displays the search
results.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
Installing the Correct Driver
3-11