Removing The 6.10 Driver For Windows 2000 - Cisco AIR-PCM342 Hardware Installation Manual

Removing the Driver
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17

Removing the 6.10 Driver for Windows 2000

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
4-12
Select the Cisco Systems wireless LAN adapter.
Click Remove.
When asked if you wish to continue, click Yes and Close.
When prompted to restart your computer, click No.
Remove the CD from your computer's CD-ROM drive.
Shut down your computer.
Remove the client adapter.
Go to the "Inserting the Client Adapter into a Computing Device" section on
page 3-2 for instructions on inserting your new client adapter and installing the
latest driver.
Make sure the previous client adapter is in your computer and the computer is
booted up.
Right-click the WepStat icon in the system tray on your desktop. This icon looks
like two connected computers.
Click Terminate.
Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computer's
CD-ROM drive.
Open Windows Explorer.
Click Tools, Folder Options, and View.
Under Hidden files and folders, make sure Show hidden files and folders is
selected, make sure the Hide file extensions for known file types checkbox is
deselected, and click OK.
Find the \Utilities\RmWep directory on your computer's CD-ROM drive.
Double-click the RmWep.exe file.
Go to C:\Windows\Inf and double-click the oemx.inf and oemx.pnf files, where x
equals a numeral, to open them.
Delete the oemx.inf and oemx.pnf files that are labeled Aironet.
Chapter 4 Troubleshooting and Routine Procedures
OL-0795-01