Cisco AIR-PCM342 Hardware Installation Manual page 55

Chapter 3 Installing the Client Adapter
If Windows cannot find the pcx500.sys file and requests that you insert the CD
Step 14
(even though the CD is already in your computer's CD-ROM drive), enter the
letter of your CD-ROM drive (such as D:) in the Copy files from dialog box and
click OK.
When you are notified that the installation is complete, click the Finish button.
Step 15
When you are prompted to restart your computer, remove the CD and click No.
Step 16
Step 17 Double-click My Computer, Control Panel, and Network.
Select the Cisco Systems wireless LAN adapter. Click Properties.
Step 18
In the client adapter Properties window, click the Advanced tab.
Step 19
In the Advanced window, select Client Name. Type your computer's unique
Step 20
client name in the Value dialog box.
Select SSID. Type your RF network's (case-sensitive) SSID in the Value dialog
Step 21
box. Click OK.
If you are not connected to a DHCP server, double-click My Computer,
Step 22
Control Panel, and Network. Select TCP/IP -> Cisco Systems Wireless LAN
Adapter. Click the Properties button, select Specify an IP address, and enter
the IP address, subnet mask, and default gateway address of your computer
(which can be obtained from your system administrator). Click OK.
In the Network window, click OK.
Step 23
Step 24 When prompted to restart your computer, click Yes.
The driver installation is complete.
OL-0795-01
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
Installing the Correct Driver
3-17