Upgrading The Driver For Windows 95 And 98; Upgrading The Driver For Windows Nt - Cisco AIR-PCM342 Hardware Installation Manual

Chapter 4 Troubleshooting and Routine Procedures

Upgrading the Driver for Windows 95 and 98

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10

Upgrading the Driver for Windows NT

Step 1
Step 2
Step 3
Step 4
OL-0795-01
Make sure your client adapter is installed in your computer.
Double-click My Computer, Control Panel, System, the Device Manager tab,
and Network Adapters.
Select the Cisco Systems wireless LAN adapter.
Click Properties.
Select the Driver tab.
Click the Change Driver or Update Driver button.
The Update Device Driver Wizard window appears. Click Next.
Select Search for a better driver than the one your device is using now
(Recommended) and click Next.
Select the location of the new driver (floppy disk drive or specify a location),
deselect the other options, enter the full path to the new driver (if you selected to
specify a location), and click Next.
A message appears indicating that the system is ready to install the new driver.
Click Next and Finish.
The driver upgrade is complete, and the old driver is overwritten by the new one.
Make sure your client adapter is installed in your computer.
Double-click My Computer, Control Panel, Network, and Adapters.
Select the Cisco Systems wireless LAN adapter.
Click the Update button.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
Updating the Driver
4-19