Cisco AIR-PCM342 Hardware Installation Manual page 46

Installing the Correct Driver
Locate the Win95Driver.exe file on your floppy disk or in a directory on your hard
Step 4
drive and double-click it to extract the driver files. Unless you specify a different
location, the files are placed on the floppy disk.
Note
Follow the instructions in the "Inserting the Client Adapter into a Computing
Step 5
Device" section on page 3-2 to insert the client adapter.
After you insert the client adapter into your computing device, Windows
Step 6
automatically detects it and opens the New Hardware Found window.
Select Driver from disk provided by hardware manufacturer and click OK.
Step 7
Step 8 In the Install From Disk window, enter the path to the location where you
extracted the Windows 95 driver files. The default is A:\, so if you extracted the
files to the root directory on a floppy disk, you do not have to enter a path. If,
however, you extracted the files to a directory on your hard drive, you must enter
the entire path (for example, C:\Win95).
Step 9 Click OK.
If you are prompted to insert the Windows 95 operating system disk, click OK
Step 10
and do one of the following:
•
•
After the files are copied, remove any disks from your computer.
Step 11
Step 12 Double-click My Computer, Control Panel, and Network.
Select the Cisco Systems wireless LAN adapter and click Properties.
Step 13
Step 14 In the client adapter Properties window, click the Advanced tab.
Step 15 Select Client Name. Type your computer's unique client name in the Value
dialog box.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
3-8
Do not extract the files to the root directory of your hard
drive. Windows 95 is unable to read them from this location.
If the Windows 95 operating system files are installed on your computer, they
are usually located in the C:\Windows\Options\Cabs folder. Type
C:\Windows\Options\Cabs in the Copy files from dialog box. Click OK to
copy the required files.
If Windows 95 prompts for the Windows 95 operating system CD, insert this
CD into your CD-ROM drive. If your CD-ROM drive is drive D, the path in
the dialog box should be D:\Win95. Click OK to copy the required files.
Chapter 3 Installing the Client Adapter
OL-0795-01