Removing The 6.10 Driver For Windows Nt - Cisco AIR-PCM342 Hardware Installation Manual

Chapter 4 Troubleshooting and Routine Procedures
Step 14
Step 15
Step 16
Step 17
Step 18

Removing the 6.10 Driver for Windows NT

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
OL-0795-01
Find your computer's operating system in the following table, go to the path
listed, and delete the file indicated.
Operating System
Windows 95
Windows 98
Remove the CD from your computer's CD-ROM drive.
Shut down your computer.
Remove the client adapter.
Go to the "Inserting the Client Adapter into a Computing Device" section on
page 3-2 for instructions on inserting your new client adapter and installing the
latest driver.
Make sure the previous client adapter is in your computer and the computer is
booted up.
Right-click the WepStat icon in the system tray on your desktop. This icon looks
like two connected computers.
Click Terminate.
Insert the Cisco Aironet Series Wireless LAN Adapters CD into your computer's
CD-ROM drive.
Open Windows Explorer and find the \Utilities\RmWep directory on your
computer's CD-ROM drive.
Double-click the RmWep.exe file.
Close Windows Explorer.
Double-click My Computer, Control Panel, and Network.
In the Network window, click the Adapters tab.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
Location of File
C:\Windows\Inf
C:\Windows\Inf or
C:\Windows\Inf\Other
Removing the Driver
File to be Deleted
pc4800.inf
pc4800.inf or
aironetnetx500.inf
4-11