Cisco AIR-PCM342 Hardware Installation Manual page 53

Chapter 3 Installing the Client Adapter
Select CD-ROM drives, deselect all other options, insert the Cisco Aironet Series
Step 4
Wireless LAN Adapters CD into your computer's CD-ROM drive, and click
Next. The wizard finds the installation files on the CD and displays the search
results.
When the client adapter driver is displayed, click Next to copy the required files.
Step 5
When you receive a message indicating that Windows has finished the
Step 6
installation, click Finish.
Remove the CD from your computer's CD-ROM drive.
Step 7
Step 8 Double-click My Computer, Control Panel, and System.
In the System Properties window, click the Hardware tab.
Step 9
Click Device Manager.
Step 10
In the Device Manager window, double-click Network Adapters.
Step 11
Right-click the Cisco Systems wireless LAN adapter.
Step 12
Click Properties.
Step 13
Step 14 In the client adapter Properties window, click the Advanced tab.
In the Advanced window, select Client Name. Type your computer's unique
Step 15
client name in the Value dialog box.
Select SSID. Type your RF network's (case-sensitive) SSID in the Value dialog
Step 16
box. Click OK.
If you are not connected to a DHCP server, follow these steps:
Step 17
a.
b.
c.
d.
e.
If you are prompted to restart your computer, click Yes.
Step 18
The driver installation is complete.
OL-0795-01
Double-click My Computer, Control Panel, and Network and Dial-up
Connections.
Right-click Local Area Connection.
Click Properties, Internet Protocol (TCP/IP), and Properties.
Click Use the following IP address and enter the IP address, subnet mask,
and default gateway address of your computer (which can be obtained from
your system administrator). Click OK.
In the Local Area Connection Properties window, click OK.
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
Installing the Correct Driver
3-15