Juniper JUNOSE 10.0.X PHYSICAL LAYER Configuration Manual page 70

JUNOSe 10.0.x Physical Layer Configuration Guide
44
Monitoring Interfaces
5 minute output rate Data rates based on the traffic sent in the last five
minutes
Interface statistics
Packets received Number of packets received on the interface
Bytes received Number of bytes received on the interface
Errored packets received Number of packets with errors received on
the interface
Packets sent Number of packets sent on the interface
Bytes sent Number of bytes sent on the interface
Errored packets sent Number of packets with errors sent from the interface
Example
host1#show interfaces serial 0/1:2 brief
Serial Interface at 0/1:2
Description: ottawa012 hdlc channel
ifOperStatus = ifOperUp
snmp trap link-status = disabled
Encapsulation hdlc
Crc type checking - CRC16
Hdlc mru = 1600
Hdlc mtu = 1600
Hdlc interface speed = 768000
Hdlc idle-character marks
Invert data disabled
Ds0 time slot map = 0xfff
Ds0 mode = Nx64
Serial Interface at 13/0:2
Description: ottawa013 hdlc channel
ifOperStatus = ifOperUp
snmp trap link-status = disabled
Crc type checking - CRC16
Hdlc mru = 1600
Hdlc mtu = 1600
Hdlc interface speed = 768000
Invert data disabled
Ds0 time slot map = 0xfff000
Ds0 mode = Nx64
Found 2 Serial Interfaces
See show interfaces.