Table of Contents
Advertisement
Equipment Identification Code eic string for FDL
Line Identification Code lic string for FDL
Frame Identification Code fic string for FDL
Unit Identification Code unit string for FDL
Facility Identification Code pfi string for FDL
Port Code port string for FDL
Generator Number generator string for FDL
BERT test Number of current test and total number of tests
Test interval Length of the BERT test
status Sync (controller is synchronized with remote device) or NoSync
(controller is not synchronized with remote device)
Sync count Number of times the pattern detector synchronized with
the incoming data pattern
Received bit count Number of bits received
Error bit count Number of bits with errors
Number of valid intervals Number of 15-minute intervals since the line
module was last powered on or reset
Time elapse in current interval Statistics are reported in 15-minute intervals
Errored seconds Number of errored seconds encountered by a T1 in the
current interval
Severely errored seconds Number of severely errored seconds encountered
by a T1 in the current interval
Severely errored frame seconds Number of severely errored framing
seconds encountered by a T1 in the current interval
Unavailable seconds Number of unavailable seconds encountered by a T1
in the current interval
Clock slip seconds Number of clock slips encountered by a T1 in the current
interval
Path code violations Number of coding violations encountered by a T1 in
the current interval
Line errored seconds Number of line errored seconds encountered by a
T1 in the current interval
Bursty errored seconds Number of bursty errored seconds encountered by
a T1 in the current interval
Chapter 1: Configuring Channelized T3 Interfaces
Monitoring Interfaces
35
Advertisement
Table of Contents
