Table of Contents
Advertisement
show ip mac-validate interface
Link: Operational Secondary Link Selected,
Administrative Link Selected Automatically
Link Failover Timeout: Operational 652 ms, Administrative default
Primary link selected 6302 times, Secondary link selected 6302 times
Primary link signal detected, Secondary link signal detected
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
In: Bytes 0, Unicast 0
Multicast 0, Broadcast 0
Errors 0, Discards 0, Mac Errors 0, Alignment 0
CRC 0, Too Longs 0, Symbol Errors 0
Out: Bytes 0, Unicast 0
Multicast 0, Broadcast 0
Errors 0, Discards 0, Mac Errors 0, Deferred 0, No Carrier 0
Collisions: Single 0, Multiple 0, Late 0, Excessive 0
ARP Statistics:
In: ARP requests 0, ARP responses 0
Errors 0, Discards 0
Out: ARP requests 0, ARP responses 0
Errors 0, Discards 0
Administrative qos-shaping-mode: none
Operational qos-shaping-mode: none
queue 0: traffic class control, bound to GigabitEthernet10/2
Queue length 0 bytes
Forwarded packets 0, bytes 0
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
See show interfaces.
Use to display the status of the MAC address validation on the physical interface.
Field descriptions
FastEthernet interfaceSpecifier On the ERX-14xx models, ERX-7xx models,
and ERX-310 router, the Fast Ethernet or Gigabit Ethernet interface slot/port;
on the E120 and E320 routers, the Gigabit Ethernet or 10-Gigabit Ethernet
interface slot/adapter/port
Keyword assigned to interface Options: Strict or Loose
Address IP address of the entry
Hardware Addr Physical (MAC) address of the entry
Example
host1:boston#show ip mac-validate interface fastEthernet 11/0
FastEthernet11/0:
Strict
Chapter 5: Configuring Ethernet Interfaces
Monitoring Ethernet Interfaces
209
Advertisement
Table of Contents
