Table of Contents
Advertisement
3.
4.
mdl carrier
mdl string
mdl transmit
Specify the MDL messages.
host1(config-controll)#mdl string eic "ERX-1410"
host1(config-controll)#mdl string fic "FG786"
host1(config-controll)#mdl string lic " Bldg 10"
host1(config-controll)#mdl string pfi "Site 25"
host1(config-controll)#mdl string port 0800
Enable transmission of MDL messages.
host1(config-controll)#mdl transmit path-id
host1(config-controll)#mdl transmit idle-signal
host1(config-controll)#mdl transmit test-signal
Use to specify that an interface is used in the carrier environment.
Example
host1(config-controll)#mdl carrier
Use the no version to restore the default situation, in which the interface does
not operate in the carrier environment.
See mdl carrier.
Use to specify an MDL message.
Example
host1(config-controll)#mdl string port 0800
Use the no version to restore the default value to the specified MDL message or
to all MDL messages.
See mdl string.
Use to enable transmission of MDL messages.
Specify the keyword path-id to transmit path identifications every second.
Specify the keyword idle-signal to send idle signals every second.
Specify the keyword test-signal to transmit test signals every second.
Example
host1(config-controll)#mdl transmit test-signal
Use the no version to disable transmission of the specified MDL message or all
MDL messages.
See mdl transmit.
Chapter 2: Configuring T3 and E3 Interfaces
Configuration Tasks
53
Advertisement
Table of Contents
