Displaying Etherchannel, Pagp, And Lacp Status - Cisco ME 3400G-2CS - Ethernet Access Switch Software Configuration Manual

Chapter 31 Configuring EtherChannels

Displaying EtherChannel, PAgP, and LACP Status

To display EtherChannel, PAgP, and LACP status information, use the privileged EXEC commands
described in
Table 31-4 Commands for Displaying EtherChannel, PAgP , and LACP Status
Command
show etherchannel [channel-group-number {detail |
port | port-channel | protocol | summary}] {detail |
load-balance | port | port-channel | protocol |
summary}
show pagp [channel-group-number] {counters |
internal | neighbor}
show lacp [channel-group-number] {counters |
internal | neighbor}
You can clear PAgP channel-group information and traffic counters by using the clear pagp
{channel-group-number counters | counters} privileged EXEC command.
You can clear LACP channel-group information and traffic counters by using the clear lacp
{channel-group-number counters | counters} privileged EXEC command.
For detailed information about the fields in the displays, see the command reference for this release.
78-17058-01
Table 31-4:
Description
Displays EtherChannel information in a brief, detailed, and
one-line summary form. Also displays the load-balance or
frame-distribution scheme, port, port-channel, and protocol
information.
Displays PAgP information such as traffic information, the
internal PAgP configuration, and neighbor information.
Displays LACP information such as traffic information, the
internal LACP configuration, and neighbor information.
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
Displaying EtherChannel, PAgP, and LACP Status
31-21