Displaying The Ssh Configuration And Status - Cisco ME 3400G-2CS - Ethernet Access Switch Software Configuration Manual

Chapter 7 Configuring Switch-Based Authentication
Command
Step 5 show ip ssh
or
show ssh
Step 6 copy running-config startup-config
To return to the default SSH control parameters, use the no ip ssh {timeout | authentication-retries}
global configuration command.

Displaying the SSH Configuration and Status

To display the SSH server configuration and status, use one or more of the privileged EXEC commands
in Table
Table 7-3
Command
show ip ssh
show ssh
For more information about these commands, see the "Secure Shell Commands" section in the "Other
Security Features" chapter of the Cisco IOS Security Command Reference, Cisco IOS Release 12.2, at
this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_r/fothercr/
srfssh.htm.
78-17058-01
Purpose
Show the version and configuration information for your SSH server.
Show the status of the SSH server connections on the switch.
(Optional) Save your entries in the configuration file.
7-3:
Commands for Displaying the SSH Server Configuration and Status
Purpose
Shows the version and configuration information for the SSH server.
Shows the status of the SSH server.
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
Configuring the Switch for Secure Shell
7-41