Package And Content Management Error Messages - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - TROUBLESHOOTING GUIDE 08-22-2008 Troubleshooting Manual

Package and Content
1 2
Management Error Messages
This section contains detailed explanations of the error messages you might encounter using the
® ®
Novell ZENworks Linux Management Package and Content Management features:
"Error receiving message: Unknown response message from server, status: CancelSignal" on
page 73
"Error receiving message: Read failure" on page 73
"Error receiving message: Cannot deploy this version because one or more packages have been
deleted" on page 73
"Error receiving message: More than one bundle exists with the name bundle_name. Use -g
option to install the bundle by GUID" on page 74
Error receiving message: Unknown response message from server, status:
CancelSignal
Source: ZENworks Linux Management; Package and Content Management
Action: Do the following:.
1 Increase the memory-threshold value in the zmd.conf file. The
2 Restart the zmd.
Error receiving message: Read failure
Source: ZENworks Linux Management; Package and Content Management
Action: Do the following:.
1 Increase the memory-threshold value in the zmd.conf file. The
2 Restart the zmd.
Error receiving message: Cannot deploy this version because one or more packages
have been deleted
Source: ZENworks Linux Management, Package and Content Management
Explanation: The error message is displayed on the Secondary server for all packages after
content replication. But you can assign this bundle to all the managed devices
that are registered to the Secondary server.
Action: Ignore the message.
zmd.conf file is located in /etc/zmd/ on SLES 10 and SLED 10
devices, and in /etc/opt/novell/zenworks/zmd/ on other
devices.
zmd.conf file is located in /etc/zmd/ on SLES 10 and SLED 10
devices, and in /etc/opt/novell/zenworks/zmd/ on other
devices.

Package and Content Management Error Messages

12
73