Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - TROUBLESHOOTING GUIDE 08-22-2008 Troubleshooting Manual page 36

I am receiving unknown traps on the trap console
Severity: ZENworks Linux Management; Event Monitoring
Possible Cause: The messagelogger.mib file is not compiled on the server.
Unable to send the traps to the trap console
Severity: ZENworks Linux Management; Event Monitoring
Possible Cause: You might have defined filters on the trap console.
Possible Cause: The port number you have specified is not correct.
36 Novell ZENworks 7.2 Linux Management Troubleshooting Guide
Action: Compile the messagelogger.mib file located at /opt/novell/
zenworks/share/messagelogger.
For example, if you want to compile messagelogger.mib on the Management
and Monitoring Services console of ZENworks 7 Server Management, do the
following:
1 Right-click the ConsoleOne
2 In Properties of name of the Site Server dialog box, select the MIB Pool
page.
3 Click Modify Pool.
4 In the Add/Remove MIBs dialog box, click Add, then select the MIB that
needs to be compiled.
5 Click Compile.
Action: Clear the filters you have defined that block the traps generated from
ZENworks 7.2 Linux Management server.
Action: To specify the correct port number:
1 In the ZENworks Control Center, click Configuration.
2 In Management Zone Settings, click Centralized Message Logging.
3 Specify the correct SNMP port number of the trap console in the SNMP
Trap section.
®
Site Serve object, then click Properties.