host post is not an RFB Server
Source: ZENworks Linux Management; Remote Management
Severity: Important
Possible Cause: The Remote Control Service has failed to authenticate to the X server.
Action: Restart the Display Manager.
1 Switch to any one of the text consoles by pressing Ctrl + Alt + F1 in your
2 Change the runlevel of the managed device to 3 by entering the following
3 Change the runlevel back to 5 by entering the following command at the
Unable to initiate a remote session because the Remote Management settings
cannot be read on the Managed Device
Source: ZENworks Linux Management; Remote Management
Possible Cause: On Linux, the http and https IP addresses are different in the system-wide
proxy setting.
Action: Use the same proxy for both http and https.
graphical session.
command at the shell prompt:
init 3
shell prompt:
init 5
Remote Management Error Messages
61