Installing On Netware; Installing On Windows; Installing On Macintosh Os X - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - DISCOVERY-DEPLOYMENT-RETIREMENT REFERENCE 10.3 30-03-2010 Deployment Manual

12.3 Installing on NetWare

1 Make sure you have downloaded
has access to the target NetWare server. If you haven't, see
Module from a ZENworks Server," on page
2 Extract
ZENworks_Adaptive_Agent_Netware.zip
NetWare server.
3 Enter the following command at the NetWare console to start the install:
sys:\temp\zen_aa\install ZENworks_Server_IP_Address
For example:
sys:\temp\zen_aa\install 1.1.1.1
The Inventory-Only module files are copied to
loaded.
If is not loaded, enter the following command:
zenaa.nlm
load zenaa
The device is added to the Inventoried devices page in ZENworks Control Center (Devices tab
> Inventoried tab > Workstations or Servers folder).

12.4 Installing on Windows

1 Make sure you've downloaded
Windows device. If you haven't, see
ZENworks Server," on page
2 Make sure the location of
target machine.
3 At a command prompt, run
installation program.
The installation program requires no user interaction. When it is finished, the Inventory-Only
module is started and the device is added to the Inventoried devices page in ZENworks Control
Center (Devices tab > Inventoried tab > Workstations or Servers folder).

12.5 Installing on Macintosh OS X

1 Make sure you've downloaded the
target Macintosh device.
For more information on how to download the
image, see Section 12.1, "Downloading the Module from a ZENworks Server," on page
2 Double-click the
ZENworks_Adaptive_Agent_OSX.dmg
3 Compress the
ZENworks_Adaptive_Agent_OSX
ways:
If you are using a single-button mouse, select the
package, click
ZENworks_Adaptive_Agent_OSX option.
If you are using a three-button mouse, right-click the
package, then select the Compress ZENworks_Adaptive_Agent_OSX option.
ZENworks_Adaptive_Agent_Netware.zip
101.
sys:\zenworks\zaa
ZENworks_Adaptive_Agent_Windows.exe
Section 12.1, "Downloading the Module from a
101.
on the target machine is in the path variable of the
msiexec.exe
ZENworks_Adaptive_Agent_Windows.exe
ZENworks_Adaptive_Agent_OSX.dmg
ZENworks_Adaptive_Agent_OSX.dmg
package into a zip file in one of the following
on the toolbar, then select the Compress
Section 12.1, "Downloading the
to on the target
sys:\temp\zen_aa
and
zenaa.nlm
to the target
to launch the
disk image to the
file.
ZENworks_Adaptive_Agent_OSX
ZENworks_Adaptive_Agent_OSX
Deploying the Inventory-Only Module 103
to a device that
is
disk
101.