Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - DISCOVERY-DEPLOYMENT-RETIREMENT REFERENCE 10.3 30-03-2010 Deployment Manual page 91

Wizard Page
Discovered Device Browser
dialog box > Source >
existing user source
Discovered Device Browser
dialog box > Source > Add
New LDAP Source
Details
1. In the Source list, select the existing user source.
The root of the user source is displayed in the source list.
2. Browse the directory to find the desired device.
3. Click to move the device to the Selected Devices list.
4. When you are finished selecting devices, click OK.
1. In the Source list, select Add New LDAP Source to display the
Add New Source dialog box.
2. Fill in the following fields:
LDAP Source Name: Provide a name for the LDAP source.
LDAP Server: Specify the IP address or DNS hostname of the
LDAP server.
LDAP Port/Use SSL: Defaults to the standard SSL port (636)
or non-SSL port (389) depending on whether the Use SSL
option is enabled or disabled. If your LDAP server is listening
on a different port, select that port.
LDAP Root Context: Establishes the point in the directory
where you can begin to browse. If you don't specify a base DN,
the directory's root container becomes the entry point.
Save Credentials to Datastore: Unless you save the
credentials (defined in the Credentials list), they are stored
only in memory. Saved credentials are encrypted in the
database for increased security. Credentials are cleared from
memory when the ZENworks Server is restarted. If you want to
permanently retain the credentials as part of the deployment
task, you should save the credentials.
Credentials: Click Add to enter a username and password
that provides read-only access to the directory. The user can
have more than read-only access, but read-only access is all
that is required and recommended.
For Novell eDirectory access, use standard LDAP notation.
For example:
cn=admin_read_only,ou=users,o=mycompany
For Microsoft Active Directory, use standard domain notation.
For example:
AdminReadOnly@mycompany.com
3. Click OK to display the LDAP directory in the source list.
4. Browse the directory to find the desired device.
5. Click to move the device to the Selected Devices list.
6. When you are finished selecting devices, click OK.
Deploying the ZENworks Adaptive Agent 91