Installing On Linux/Unix - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - DISCOVERY-DEPLOYMENT-RETIREMENT REFERENCE 10.3 30-03-2010 Deployment Manual

Platform
Novell
Mac OS X
Microsoft Windows
AIX
HP-UX
Linux
Solaris
3 Click the filename for the desired platform and download the file.
4 Skip to one of the following sections to continue with installation of the module:
Section 12.2, "Installing on Linux/UNIX," on page 102
Section 12.3, "Installing on NetWare," on page 103
Section 12.4, "Installing on Windows," on page 103
Section 12.5, "Installing on Macintosh OS X," on page 103

12.2 Installing on Linux/UNIX

1 Log in as a user with installation rights on the device.
2 Make sure you have downloaded the correct Inventory-Only module package to the target
device. If you haven't, see
on page
3 Create a temporary directory to unpack the installation files in. Do not use
temporary installation directory; it interferes with the package installation. You can, however,
create a separate directory under
4 Move the downloaded package to the directory created in
5 At a command prompt, change to the location of the Inventory-Only module package file.
6 Unpack the Inventory-Only module package by running the following command, using the
Linux package as an example, from the directory in which the package is located:
tar -zxvf zaaio-10.3.0-linux-x86.tar.gz
7 Install the Inventory-Only module by running the following command, using the Linux
package as an example, from the directory in which the file is located:
./zenumia-install.sh -s <server>
where
The installation program requires no user interaction. When it is finished, the Inventory-Only
module is started and the device is added to the Inventoried devices page in ZENworks Control
Center (Devices tab > Inventoried tab > Workstations or Servers folder).
8 Delete the directory created in
102 ZENworks 10 Configuration Management Discovery, Deployment, and Retirement Reference
Filename
®
NetWare
ZENworks_Adaptive_Agent_Netware.zip
ZENworks_Adaptive_Agent_OSX.dmg
ZENworks_Adaptive_Agent_Windows.exe
zaaio-10.3.0-aix-powerpc.tar.gz
zaaio-10.3.0-hpux.-parisc.tar.gz
zaaio-10.3.0-linux-x86.tar.gz
zaaio-10.3.0-sunos-sparc.tar.gz
Section 12.1, "Downloading the Module from a ZENworks Server,"
101.
is the DNS name or IP address of a ZENworks server.
server
, such as
/tmp /tmp/zaaio
Step 3 and its contents.
as the
/tmp
.
Step 3.