Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - DISCOVERY-DEPLOYMENT-RETIREMENT REFERENCE 10.3 30-03-2010 Deployment Manual page 87

Wizard Page
Select Primary Server page >
Primary Server field
Select Windows Proxy page
> Override Zone Windows
Proxy Settings field
Select Windows Proxy page
> Use Windows Proxy for
Windows Primary Server field
General Options page >
Deployment Package field
Details
Select the ZENworks Server that you want to perform the
deployment task.
Select this option if you want to override the
configured at the Management Zone in order to modify the settings
of a task.
A Windows Proxy is primarily used for Linux Primary Servers that
cannot perform deployment tasks on Windows managed devices.
However, you can also use a Windows Proxy for Windows Servers if
you want to deploy devices in a different subnet than the Primary
Server.
In order to protect information, such as a deployment credential, that
is passed between the ZENworks Server and the Windows Proxy,
the connection between the ZENworks Server and the Windows
Proxy is secured through SSL.
Select this option if you want to use a Windows Proxy instead of the
Windows Primary Server to perform the deployment tasks.
For deployment, you need to add File and Printer Sharing as an
exception in the Windows Firewall configuration settings. By default,
the scope of the exception applies only to a local subnet. If the
target device is in a different subnet than the Primary Server from
which the deployment is run, you also need to add the IP address of
the Primary Server as an exception. However, if you use a Windows
Proxy in the same subnet as a target device, you do not need to
change the scope of the Windows Firewall exception.
Windows Proxy: Select the managed Windows device (server or
workstation) on which you want to perform deployment tasks on
behalf of Linux Primary Servers or Windows Servers.
Windows Proxy Timeout: Specify the number of seconds you
want the ZENworks Server to wait for a response from the Windows
Proxy. Any responses received after the specified timeout period are
discarded.
Depending upon the processor architecture of the managed device,
select the deployment package to be used for installing ZENworks
Adaptive Agent on the device.
If you are not sure about the device's processor architecture,
choose the package with target architecture as All, which applies to
32-bit and 64-bit platforms. If the selected package has been
deleted from the Primary Server, then the default deployment
package is deployed.
Windows Proxy settings
Deploying the ZENworks Adaptive Agent 87