Customizing Features After Deployment; Changing The Target Installation Directory; Section 10.3, "Changing The Target Installation Directory - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - DISCOVERY-DEPLOYMENT-RETIREMENT REFERENCE 10.3 30-03-2010 Deployment Manual

3 In the Agent Features panel:
If you do not want to install a feature, deselect Installed next to a feature. The selected
feature is not installed on the device. If you choose to deselect all the features, then only
the core agent is installed.
If you want to install but disable a feature, select Installed and Disabled next to a
feature.The disabled feature is not uninstalled from the currently managed devices. The
feature is installed on the device, but it is nonfunctional.
4 To save the changes, click Apply.
The installation of Bundle Management, Remote Management, or User Management features
requires a reboot of your device. The installation of Image Management feature requires a
reboot only on Windows 2008, Windows Vista, and Windows 7. You are prompted to reboot
your device based on the selected reboot option.
You can now proceed to deploy the agent to a device manually or by using a task.
For information on how to deploy the agent by using a task, see
Deploy the Agent," on page
Section 10.5, "Manually Deploying the Agent," on page

10.2.2 Customizing Features after Deployment

The ZENworks Adaptive Agent is deployed with the features selected at the Management Zone
level. After deploying the agent to a device, you can do any of the following:
Change the agent settings configured at the Management Zone level
Override the Management Zone settings at the device folder or device level
The new settings are applied to the agent on a device refresh.
For more information on how to override and configure the settings for an existing agent, see
"Configuring Adaptive Agent Settings after
Management System Administration

10.3 Changing the Target Installation Directory

By default, the ZENworks Adaptive Agent is installed to the following locations:
On a Windows 32-bit device:
On a Windows 64-bit device:
To install the agent to a different location, you can create a ZENWORKS_HOME system
environment variable on the device prior to deployment and set the variable to the new target
installation directory. The path must always end with
acceptable paths are:
c:\Novell\ZENworks
c:\Program Files\Corporate\Novell\ZENworks
d:\Applications\Novell\ZENworks
80 ZENworks 10 Configuration Management Discovery, Deployment, and Retirement Reference
81. For information on how to deploy the agent manually, see
Deployment" in the
Reference.
Windows_drive:\Program Files\Novell\ZENworks
Windows_drive:\Program Files(x86)\Novell\ZENworks
\Novell\ZENworks
Section 10.4, "Using a Task to
95.
ZENworks 10 Configuration
. Some examples of