Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - DISCOVERY-DEPLOYMENT-RETIREMENT REFERENCE 10.3 30-03-2010 Deployment Manual page 90

3 Complete the wizard by using information from the following table to fill in the fields.
Wizard Page
Enter Deployment Task page Specify a name for the task. The name cannot include any of the
Select Devices page
Discovered Device Browser
dialog box > Source > IP
Address
Discovered Device Browser
dialog box > Source > Add
New CSV File
90 ZENworks 10 Configuration Management Discovery, Deployment, and Retirement Reference
Details
following invalid characters: / \ * ? : " ' < > | ` % ~
Allows you to identify the devices to which you want to deploy the
ZENworks Adaptive Agent.
Click Add to display the Discovered Device Browser dialog box.
1. In the Source list, select IP Address.
2. Fill in the IP Address Range/Host Name field.
The address can use any of the following formats:
xxx.xxx.xxx.xxx: Standard dotted-decimal notation for a single
address. For example, 123.45.167.100.
xxx.xxx.xxx.xxx - xxx.xxx.xxx.xxx: Standard dotted-decimal
notation for a range of addresses. For example,
123.45.167.100 - 123.45.167.125.
xxx.xxx.xxx.xxx/n: Standard CIDR (Classless Inter-Domain
Routing) notation. For example, 123.45.167.100/24 matches
all IP addresses that start with 123.45.167.
hostname: Standard device hostname. For example,
workstation1.
3. To add the device to the Selected Devices list, click Add.
4. When you are finished selecting devices, click OK.
1. In the Source list, select Add New CSV File to display the Add
New Source dialog box.
2. Fill in the following fields:
CSV File: Browse for and select the CSV file containing the
devices to which you want to deploy the agent.
DNS Name Column: Select the number of the column that
contains the DNS name information.
IP Address Column: Select the number of the column that
contains the IP address information. If you want the IP address
to be resolved from the DNS name rather than imported from
the file, select the Resolve IP from DNS name option.
OS Type Column: Select the number of the column that
contains the operating system information. If you want to
specify a default OS type rather than importing it from the file,
select the Use default OS for all selections option, then select
the default operating system in the Default OS Type field.
3. Click OK to display the devices in the source list.
4. Click to move a device to the Selected Devices list.
5. When you are finished selecting devices, click OK.