Deploying To A Discovered Device - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - DISCOVERY-DEPLOYMENT-RETIREMENT REFERENCE 10.3 30-03-2010 Deployment Manual

4 Open the Services window and set the Remote Registry service to start automatically, then start
it.
5 Click the desktop Start menu > Settings > Control Panel.
6 Double-click Network and Sharing Center.
7 In the left pane, click Change advanced sharing settings.
8 Select Turn on file and printer sharing, then click Save Changes.

10.4.2 Deploying to a Discovered Device

This section assumes that you've already performed a discovery task to add the target devices to
your ZENworks database. If you have not, you can perform the discovery task before continuing
(see Part I, "Device Discovery," on page
deployment task (see Section 10.4.3, "Deploying to a Non-Discovered Device," on page
To deploy the ZENworks Adaptive Agent to a discovered device:
1 In ZENworks Control Center, click the Deployment tab.
The Deployable Device panel lists all the devices (imported or discovered) to which you can
deploy the Adaptive Agent.
2 In the Deployment Tasks panel, click New to launch the Deploy Device Wizard.
3 Complete the wizard by using information from the following table to fill in the fields.
Wizard Page
Enter Deployment Task page Specify a name for the task. The name cannot include any of the
Select Devices page
11) or you can perform the discovery as part of the
Details
following invalid characters: / \ * ? : " ' < > | ` % ~
1. Click Add to display the Discovered Device Browser dialog
box.
The default view displays all discovered devices in your
Management Zone.
2. Click to select a device.
3. When you have finished selecting devices, click OK to return
the Select Devices page.
The devices you selected are displayed in the list.
89).
Deploying the ZENworks Adaptive Agent 85