Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - DISCOVERY-DEPLOYMENT-RETIREMENT REFERENCE 10.3 30-03-2010 Deployment Manual page 104

The
ZENworks_Adaptive_Agent_OSX.zip
4 Double-click the
ZENworks_Adaptive_Agent_OSX.pkg
5 Double-click the
package.
6 If a message appears telling you a program needs to run to determine whether the package can
be installed, click Continue until you reach the Select Destination page.
7 Select a destination volume, then click Continue to display the Installation Type page.
8 Click Install.
9 When prompted to authenticate, enter a username and password for the target device, then click
OK.
The installation begins. The
that asks you to enter the name of a ZENworks Server.
10 On the bottom line of the text file, enter the IP address or DNS name of the ZENworks Server
you want the device to communicate with.
11 Save the file and close the window.
The client files are installed.
If you are distributing the module to multiple devices, you can create an options file to include
with the package. With the options file installed, the TextEdit window doesn't appear, and you
can skip this step. For information on creating an options file, see
Options File" on page
12 When the installation is finished, click Close.
The Inventory-Only module is started and the device is added to the Inventoried Devices page
in ZENworks Control Center (Devices tab > Inventoried tab > Workstations or Servers folder).
Customizing the Installer Options File
If you want to install the Inventory-Only module on a number of devices, and you want them to
connect to the same ZENworks Server, you can create an options file that contains the name of the
ZENworks Server. This causes the installation package to not prompt for the ZENworks Server
name by launching the servername.txt file.The options file is created automatically when you install
the module on a device. If you want remaining devices to use the same options file, you can simply
distribute the copy of the package you used to install the Collection Client.
To create a different options file:
1 Open a text editor other than TextEdit and enter the following line:
-s ZENworks_Server_name
If your Macintosh devices are unable to resolve the DNS name of your ZENworks Server, you
can use the IP address:
-s 192.168.3.39
2 Save the text file as
3 Make sure that the text file was saved as simple text.
4 Control-click the
Read & Write.
104 ZENworks 10 Configuration Management Discovery, Deployment, and Retirement Reference
ZENworks_Adaptive_Agent_OSX.zip
file.
ZENworks_Adaptive_Agent_OSX.pkg
servername.txt
104.
(with no extension).
options
file and select Get Info. Ensure that the permissions are set to
zenumia.pkg
file is generated on the desktop.
file to generate the
file to launch the installation
file opens in a TextEdit window, containing text
"Customizing the Installer