Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - DISCOVERY-DEPLOYMENT-RETIREMENT REFERENCE 10.3 30-03-2010 Deployment Manual page 36

Wizard Page
Select Discovery Type page
Enter LDAP Settings page >
Search pre-configured LDAP
source field
36 ZENworks 10 Configuration Management Discovery, Deployment, and Retirement Reference
Details
Select LDAP Discovery Task.
Specify a name for the task. The name cannot include any of the
following invalid characters: / \ * ? : " ' < > | ` % ~
The Enter LDAP Settings page lets you identify the LDAP directory
and contexts where you want to perform the discovery task.
A preconfigured LDAP source is one that has already been defined
as a user source in your Management Zone. If you want to select a
new source, see "Enter LDAP Settings page > Specify an LDAP
Source field" on page 37.
To use a preconfigured source:
1. Select Search pre-configured LDAP source, then select the
desired source.
2. If you don't want to search the entire LDAP directory, you can
identify specific search contexts/groups. To do so:
a. In the LDAP Search Contexts/Groups panel, click Add to
display the Enter Context or Group Information dialog
box.
b. Fill in the following fields:
Context/Group DN: Click Browse to locate and select
the context/group you want to search.
Recursive Search: Select this option to search all
subcontexts/subgroups.
c. Click OK to save the search context/group.
3. If necessary, modify the LDAP search filter.
By default, the filter searches for the computer objectClass or
server objectClass. When modifying the filter, you can use the
standard filter syntax for your LDAP directory.