Creating A Registration Rule - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - DISCOVERY-DEPLOYMENT-RETIREMENT REFERENCE 10.3 30-03-2010 Deployment Manual

Wizard Page
Group Membership page
When you complete the wizard, the key is added to the Registration Keys panel.
You can also use the
registration-create-key
registration key. For more information, see
Configuration Management Command Line Utilities

9.2.2 Creating a Registration Rule

1 In ZENworks Control Center, click the Configuration tab, then click the Registration tab.
Details
Specify the groups that devices will become members of when they
register.
Adding groups causes registering devices to receive any
assignments provided by membership in the groups. Assignments
from group membership are additive, so if a device is assigned to
both groups A and B, the device receives all assignments from both
groups.
You can only add groups that are valid for the type of device folder
you specified on the previous page of the wizard. For example, if
you specified the /Devices/Workstations
choose workstation groups.
To specify a group:
1. Click Add to display the Groups dialog box.
2. Browse for and select the group (or groups) to which you want
to add the devices. To do so:
a. Click next to a folder (for example, the
Workstations
through the folders until you find the group you want to
select.
or
Search for the group by entering its name in the Item
name box. You can use an asterisk (*) as a wildcard. For
example, entering P* finds all groups that start with P, or
entering *Accounting finds all groups that end with
Accounting.
b. Click the underlined link in the Name column to select the
group and display its name in the Selected list box.
c. Repeat steps 2a and 2b until you've selected all groups
to which you want to assign membership.
d. Click OK to add the selected groups to the list.
command in the zman utility to create a
"Registration Commands" in the
Reference.
folder, you can only
folder or Servers folder) to navigate
ZENworks 10
Registering Devices 65