Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - DISCOVERY-DEPLOYMENT-RETIREMENT REFERENCE 10.3 30-03-2010 Deployment Manual page 68

Wizard Page
Device Fields
Group Membership page
When you complete the wizard, the rule is added to the Registration Rules panel. Rules are
applied from the top down. You want to list the more restrictive rules first, followed by the
more general rules. If no rules apply, the default server and workstation rules are applied.
4 If you want to reorder the rules, click Advanced (located in the upper right corner of the
Registration Rules panel).
5 Select the check box in front of the rule you want to move.
6 Click Move Up or Move Down to reposition the rule.
You can also use the
more information, see
Command Line Utilities
68 ZENworks 10 Configuration Management Discovery, Deployment, and Retirement Reference
Details
Specify the department, site, and location information you want
entered on a device's details page when it registers. For example, if
you enter
Accounting
is entered in the Department field on the device's details page.
Specify the groups that devices will become members of when they
register.
Adding groups causes registering devices to receive any
assignments provided by membership in the groups. Assignments
from group membership are additive, so if a device is assigned to
both groups A and B, the device receives all assignments from both
groups.
You can only add groups that are valid for the type of device folder
you specified on the previous page of the wizard. For example, if
you specified the
choose workstation groups.
To specify a group:
1. Click Add to display the Groups dialog box.
2. Browse for and select the group (or groups) to which you want
to add the devices. To do so:
a. Click
Workstations
through the folders until you find the group you want to
select.
or
Search for the group by entering its name in the Item
name box. You can use an asterisk (*) as a wildcard. For
example, entering P* finds all groups that start with P, or
entering *Accounting finds all groups that end with
Accounting.
b. Click the underlined link in the Name column to select the
group and display its name in the Selected list box.
c. Repeat steps 2a and 2b until you've selected all groups
to which you want to assign membership.
d. Click OK to add the selected groups to the list.
command in the zman utility to create a registration rule. For
ruleset-create
"Ruleset Commands" in the
Reference.
in the Department field, then
/Devices/Workstations
next to a folder (for example, the
folder or
Servers
ZENworks 10 Configuration Management
Accounting
folder, you can only
folder) to navigate