Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - DISCOVERY-DEPLOYMENT-RETIREMENT REFERENCE 10.3 30-03-2010 Deployment Manual page 112

To retire or unretire an inventoried device:
1 In ZENworks Control Center, click Devices > Inventoried.
2 Click the underlined link next to the Servers or Workstations folder to display the list of servers
or workstations in your ZENworks system.
Figure 14-2
3 Select the check box in front of the server or workstation you want to retire or unretire (you can
select multiple devices).
4 Click Action > Retire Device.
or
Click Action > Unretire Device.
The icon displays in the Status column in the Servers or Workstations list for retired devices. You
can mouse over the time to see the full date and time.
You can search for all retired devices in your ZENworks system.
To search for retired servers and workstations:
1 In ZENworks Control Center, click the Devices tab.
2 (Conditional) To search for both retired servers and workstations, skip to
or
To search for only retired servers, click the underlined link next to the Servers folder to display
the list of servers.
or
To search for only retired workstations, click the underlined link next to the Workstations folder
to display the list of workstations.
3 In the Search box, select Retired from the Device State drop-down list.
112 ZENworks 10 Configuration Management Discovery, Deployment, and Retirement Reference
Devices panel showing list of inventoried devices.
Step 3.