Verifying Rom Monitor Is Upgraded - Cisco 10720 - Internet Router Installation And Configuration Manual

Chapter 3 Installing the Cisco 10720 Internet Router
The following steps are an example ROMmon update procedure:
Step 1 View ROMmon information using the show rom-monitor command.
Router(boot)# show rom-monitor
Region region1:INVALID
Region region2:INVALID
Currently running ROMMON from S (Gold) region
Copy the new ROMmon record file onto the router Flash memory using the copy tftp flash command.
Step 2
Router(boot)# copy tftp flash
Program the new ROMmon into the router ROMmon Flash memory using the upgrade rom-monitor
Step 3
file flash:name.
Router(boot)# upgrade rom-monitor file flash:name
ROMMON image upgrade in progress
Erasing flash
Programming flash
Verifying new image
ROMMON image upgrade complete, router must be reloaded.
Step 4 View ROMmon information again using the show rom-monitor command.
Router# show rom-monitor
Region region1:APPROVED, preferred
Region region2:INVALID
Currently running ROMMON from region1 region

Verifying ROM Monitor Is Upgraded

To verify the upgraded ROM monitor, use the show rom-monitor command to verify that the new
ROMmon is approved.
Router# show rom-monitor
Region F1: APPROVED, preferred
Region F2: INVALID
Currently running ROMMON from F1 region
78-13062-10
Cisco 10720 Internet Router Installation and Configuration Guide
Additional Configuration Features
3-49