Cisco 10720 - Internet Router Installation And Configuration Manual page 60

Grounding the Cisco 10720 Internet Router
Use a dual-hole cable lug to attach it to the chassis. Use two 6.3 mm (M6) screws on the 0.63-inch (16
mm) centers as shown in
(Part Number 32-0607-01). Grounding connectors shall be NRTL listed; use copper conductors only for
grounding and bonding connectors.
Figure 3-9
End View
0.48
0.08
Figure 3-10
1
2
1
Cisco 10720 Internet Router Installation and Configuration Guide
3-10
Figure
Cable Lug
Ø 0.267
2 holes
0.25 0.63
Crimping the Lug
Place ground wire in the lug
3-9, Figure 3-10, and Figure
All measurements in inches
2.24
Crimp area
0.37
2
Crimp the lug
Chapter 3 Installing the Cisco 10720 Internet Router
3-11. The lug can be ordered from Cisco
78-13062-10