Cisco 10720 - Internet Router Installation And Configuration Manual page 163

Chapter 5 Maintaining the Cisco 10720 Internet Router
Figure 5-43
Slide the power supply away from the front panel to disengage the power supply hook from the router
Step 13
hook and remove the power supply from the router. (See
After removing the power supply, replace the cover until you are ready to install a new power supply.
Step 14
This will prevent damage to the main board and other components while the router is out of service. (See
the "Removing and Installing the Router Chassis Cover" section on page
78-13062-10
Lifting the Power Supply Out of the Router
Cisco 10720 Internet Router Installation and Configuration Guide
Removing and Installing the AC or Dual DC Power Supply
Figure 5-43.)
5-13.)
5-41