Cisco 10720 - Internet Router Installation And Configuration Manual page 94

Chapter 3 Installing the Cisco 10720 Internet Router
Additional Configuration Features
!
interface FastEthernet2/23
ip address 190.10.20.1 255.255.255.0
no ip directed-broadcast
duplex auto
speed auto
media-type mdix
!
interface FastEthernet2/24
ip address 194.16.24.1 255.255.255.0
no ip directed-broadcast
duplex auto
speed auto
media-type mdix
!
ip classless
!
snmp-server engineID local 000000090200000164FF2B00
no snmp-server ifindex persist
!
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
login
!
end
Using the show version Command
Use the show version command to view the currently running version of Cisco IOS software.
In the following example of the show version command, the running system software is Cisco IOS
Release 12.0(19)SP:
Router# show version
Cisco Internetwork Operating System Software
IOS (tm) 10700 Software (C10700-P-M), Version 12.0(19)SP, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
TAC Support:http://www.cisco.com/tac
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Fri 28-Sep-01 11:44 by srani
Image text-base:0x50010960, data-base:0x50660000
ROM:System Bootstrap, Version 12.0(20010529:144545) [yuwang-rommon1 149], DEVELOPMENT
SOFTWARE
BOOTLDR:10700 Software (C10700-P-M), Version 12.0(19)SP, EARLY DEPLOYMENT RELEASE SOFTWARE
(fc1)
Router uptime is 10 minutes
System returned to ROM by power-on
Running default software
cisco C10720 (R5000) processor (revision 0xFF) with 256000K/6144K bytes of memory.
R527x CPU at 200Mhz, Implementation 40, Rev 10.0
Last reset from power-on
Toaster processor tmc0 is running.
Toaster processor tmc1 is running.
1 one-port OC48 SONET based SRP controller.
1 24 Port 100 Mbps Fast Ethernet TX controller.
24 FastEthernet/IEEE 802.3 interface(s)
Cisco 10720 Internet Router Installation and Configuration Guide
3-44
78-13062-10