Cable Management; Mounting The Router; Cisco Ios Software Configuration; Verifying The Contents In The Box - Cisco 10720 - Internet Router Installation And Configuration Manual

Internet router
Hide thumbs Also See for 10720 - Internet Router:
Table of Contents

Advertisement

Chapter 2
Preparing for Installation
You must provide a properly grounded and shielded environment. Consider electrical surge suppression
issues by addressing the following items:
Caution
Splicing can degrade cable performance.

Cable Management

The cable-management system, located on the front of the router, organizes the interface cables. The
cable-management system consists of the following components:
Before mounting the router or connecting the ports on an uplink card or access card, install the
cable-management tray. For more information, see the
section on page

Mounting the Router

Rack mount brackets are available for 19-inch EIA, 23-inch EIA, or 24-inch EIA, and ETSI racks.
Wall-mount brackets and desktop mounts are also available options. For more information about
mounting the Cisco 10720 Internet Router, see the

Cisco IOS Software Configuration

The Cisco IOS software that runs on your router contains extensive features and functionality.
For Cisco IOS software configuration information and support, refer to the configuration and command
reference publications in the Cisco IOS software configuration documentation set that corresponds to the
Cisco IOS software release installed on your Cisco hardware. You can also refer to the Cisco IOS
software release notes for the version of Cisco IOS software you are using on your router.
For a list of these documents, see

Verifying the Contents in the Box

Check the contents of the shipping packaging and verify that the following are included with your
shipment:
78-13062-10
Potential surge sources
Distance
Cable-management tray for managing cables
Cable-management cover to keep cables from being accidentally stressed
5-70.
One Cisco 10720 Internet Router fully assembled that includes the following:
1 uplink card
1 access card
1 AC or DC dual power supply
1 main board
"Installing the Cable-Management System"
"Rack-Mounting the Router" section on page
"Related Documentation" section on page
Cisco 10720 Internet Router Installation and Configuration Guide
Cisco IOS Software Configuration
3-2.
xix.
2-11

Advertisement

Table of Contents
loading

Table of Contents