Cisco 10720 - Internet Router Installation And Configuration Manual page 153

Chapter 5 Maintaining the Cisco 10720 Internet Router
Figure 5-31
Handle the edges of the RP memory module only. Do not touch the integrated circuit devices on the RP
Caution
memory module, the metal traces (or fingers) along the edge of the RP memory module, or the pins in
the RP memory socket.
Step 5 As the RP memory module is released, the module is positioned at a 45-degree angle. Gently pull the RP
memory module out of the socket. Continue to keep the module in a 45-degree angle until it is
completely removed from the socket guides. (See
Figure 5-32
a Inserting the RP memory module
Step 6 Immediately place the RP memory module in an antistatic bag to protect it from ESD damage.
78-13062-10
Moving the Latches Away from the RP Memory Module
Removing the RP Memory Module
a
45 º
Cisco 10720 Internet Router Installation and Configuration Guide
Removing and Installing the Route Processor Memory
Figure 5-32.)
b
b Locking the RP memory module
5-31