Required Tools And Equipment; Tools; Field-Replaceable Units - Cisco 10720 - Internet Router Installation And Configuration Manual

Required Tools and Equipment

Required Tools and Equipment
This section presents the following topics:
•
•

Tools

The following tools are required for maintaining the router:
•
•
•
•
•
•

Field-Replaceable Units

The following list presents field-replaceable units (FRUs) for the router:
•
•
•
•
•
•
•
•
•
•
•
Cisco 10720 Internet Router Installation and Configuration Guide
5-2
Tools, page 5-2
Field-Replaceable Units, page 5-2
ESD-preventive strap
Number 1 Phillips screwdriver
1/8-inch flat blade screwdriver
Antistatic bag (or similar ESD-preventive container)
Cable ties (optional)
Wire stripper
Replacement accessory rack mount (10720-ACCKIT=)
Replacement AC router (CISCO10720-AC-A=)
Top assembly
–
AC dual power supply
–
Fan
–
Replacement AC dual power supply (10720-AC-RPS=)
Replacement access card (For access card versions and product numbers, refer to the
Internet Router Access Card Installation and Configuration
Replacement cable-management system and rack mount brackets
Replacement DC router (CISCO10720-DC-A=)
Top assembly
DC dual power supply
–
– Fan
Replacement DC dual power supply (10720-DC-RPS=)
Replacement fan assembly (10720-FAN=)
Replacement memory
Replacement uplink card (For uplink card versions and product numbers, refer to the
Internet Router Uplink Cards Installation and Configuration
Chapter 5 Maintaining the Cisco 10720 Internet Router
publication.)
publication.)
Cisco 10720
Cisco 10720
78-13062-10