Cisco 10720 - Internet Router Installation And Configuration Manual page 57

Chapter 3 Installing the Cisco 10720 Internet Router
Figure 3-6
Note When the rack is mounted on the wall, make sure that the power receptacles are at the bottom of the
router, as shown in
Attach an ESD-preventive strap to your wrist, and to the router chassis or to a bare metal surface. (See
Step 3
the "Preventing Electrostatic Discharge" section on page
Attach the wall-mounting brackets to the side of each chassis using five screws on each side. (See
Step 4
Figure
78-13062-10
Attaching Wall-Mounting Brackets to the Router Chassis
Figure 3-6.
3-6.)
2-3.)
Cisco 10720 Internet Router Installation and Configuration Guide
Setting up the Cisco 10720 Internet Router
3-7