Sts Fixed Feature Buttons - Vertical MBX IP User Manual

STS Fixed Feature Buttons

STS Fixed Feature Buttons
1 - FLASH
2 - SPEED
3 - MSG (Message Wait)
4 - MUTE
5 - ON/OFF (Speaker)
6 - TRANS (Transfer)
7 - CONF (Conference)
8 - FWD (Forward)
9 - CAMP ON
10 - HOLD (Save)
11 - VOLUME Bar
12 - H-T-P
Call Back
--> use MSG button
DND (Do Not Disturb)
--> use FWD button
PGM (Program)
--> use TRANS button
Voice Mail
--> use MSG button
Release 1.7
lets you terminate an outside call and restore dial tone without having to
hang up the handset. It is also used to transfer calls behind a PBX or
Centrex system.
provides access to speed dialing, save number redial, and last number
redial.
allows you to initiate a message waiting indication at a station that is
unattended or in Do Not Disturb. This button also doubles as the VOICE
MAIL button and the CALL BACK button.
allows you to switch the built-in microphone on or off when using the
speakerphone. Also controls the handset microphone when using the
handset.
enables you to make a call without lifting the handset. It also turns the
telephone ON and OFF when using the speakerphone.
lets you transfer an outside call from one station to another. This button
also doubles as the PROGRAM button.
used to establish conference calls.
allows you to forward your calls to another station or location. The
FORWARD button also doubles as the DND button.
enables you to alert a busy party that an outside line is on hold for them.
Call the busy station and press the CAMP ON button. A beep tone will be
heard at the recipient's phone. The recipient can press their CAMP ON
button to be connected to the calling party.
enables you to place an outside caller on hold. The Hold button also
doubles as the SAVE or ENTER button.
allows you to adjust the volume for your speakerphone, handset, and
ringing volume.
allows you to select the intercom signaling mode: Hands-free, Tone ring,
or Privacy hands-free.
allows a user to call a busy station, press CALL BACK and when the
recipient hangs up, the user will be called back.
places your phone in Do Not Disturb mode and blocks incoming calls.
allows access into programming mode. It is also used for flexible button
programming.
allows user to call their own mailbox and to send a caller to another
user's voice mailbox.
MBX IP Station User Guide
B-7
Appendix B: IP PHONES
April 2012