Closing The Admin Domain Window; Creating And Populating Domains; Creating An Admin Domain - Brocade Communications Systems 8 Administrator's Manual

Closing the Admin Domain window

It is important to remember that any changes you make in the Admin Domain window are not saved
automatically.
Use the following procedure to close the Admin Domain window.
1. In the Admin Domain window, select File > Close.
2. Click Yes to close without saving changes, or click No to go back to the Admin Domain window

Creating and populating domains

Setting up an Admin Domain involves the following steps.

1. Creating an Admin Domain.

2. Assigning one or more administrators to the Admin Domain.
When you create an Admin Domain, you can activate the Admin Domain after you finish creating it.
If you activate the Admin Domain, you must click Apply to transfer your changes from the Web Tools
database to the fabric database so that your changes are applied to the fabric. You can log in to an
active Admin Domain. You cannot log in to an Admin Domain that was deactivated.
Creating an Admin Domain
Use the following procedure to create an Admin Domain.
1. Open the Admin Domain window, as described in
2. Click New.
3. In the Name area, assign an Admin Domain name.
4. In the ID area, assign an Admin Domain ID.
5. In the State area, select the Active check box to activate the Admin Domain when you finish
6. Click Next.
Web Tools Administrator's Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
If there are changes in the buffer that were not saved, a warning message displays. Confirm
that you want to close the Admin Domain session without saving the changes.
to save the changes (refer to
The Admin account always has access to administer the Admin Domains, even if no other
users are assigned (refer to
page 75.
The Create Admin Domain wizard displays.
You can specify a name or let the system assign the name for you.
You can specify an ID or let the system assign the ID for you.
creating it.
NOTE
Clear the Active check box if you want the Admin Domain deactivated when you finish creating
it.
Creating and populating domains
"Saving local Admin Domain changes"
"Changing user account parameters"
"Opening the Admin Domain window"
5
on page 76).
on page 212).
on
77