Snmp Cli Usage - Brocade Communications Systems 8 Reference Manual

1
Loading Brocade MIBs
NOTE
FA_v3_0.mib obsoletes the use of the connUnitPortStatFabricTable used in the FA_v2_2.mib.
FA_v3_0.mib now uses the connUnitPortStatTable for port statistics. The FA_v3_0.mib and the
FA_v2_2.mib cannot be loaded concurrently on the same SNMP management system.
The FE_RFC2837.mib and the FE_EXP.mib can be loaded concurrently on the same SNMP
management system. The FE_EXP.mib was listed in the experimental OID section. The
FE_RFC2837.mib has subsequently been ratified by the standards organizations.
All versions of Fabric OS support SNMPv1. Fabric OS v5.0.1 support SNMPv3-USM (snmpUsmMIB)
MIB. Fabric OS version 5.3.0 supports the FCIP MIB and ifXtable.
FIGURE 5

SNMP CLI usage

An example of the SNMPv3 User/Traps configuration is provided below.
Configuring SNMPv3 user/traps
1. Create user on switch in non-VF Context using CLI userconfig, with the required role.
2. Create the SNMPv3 user as shown below.
10
Brocade SNMP MIB dependencies and advised installation order
switch:admin> userconfig --add fa_adm -r fabricadmin -h0 -a 0-255
Setting initial password for fa_adm
Enter new password:********
Re-type new password:********
Account fa_adm has been successfully added.
switch:admin>
Create user on switch in VF Context using CLI userconfig, with the required role.
switch:admin> userconfig --add sa_user -r switchadmin -l 1-128 -h1 -c admin
Setting initial password for sa_user
Enter new password:********
Re-type new password:********
Account sa_user has been successfully added.
switch:admin>
DCX_54:root> snmpconfig --set snmpv3
SNMP Informs Enabled (true, t, false, f): [false] t
SNMPv3 user configuration(snmp user not configured in FOS user database will
have physical AD and admin role as the default):
User (rw): [snmpadmin1]
Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3]
Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]):
(2..2) [2]
Engine ID: [0:0:0:0:0:0:0:0:0] 80:00:05:23:01:0A:23:34:21
User (rw): [snmpadmin2]
Auth Protocol [MD5(1)/SHA(2)/noAuth(3)]: (1..3) [3] 1
New Auth Passwd:
Verify Auth Passwd:
Priv Protocol [DES(1)/noPriv(2)/3DES(3)/AES128(4)/AES192(5)/AES256(6)]):
(1..6) [2] 1
Fabric OS MIB Reference
53-1001768-01