Brocade Communications Systems 8 Reference Manual page 172

5
sw Traps
•
•
•
•
•
Refer to
the trap, if possible.
TABLE 14
SW-MIB traps
Name
"swFault
1.3.6.1.4.1.1588.2.1.1.1.0.1"
page 155
(not supported)
"swSensorScn
1.3.6.1.4.1.1588.2.1.1.1.0.2"
page 156
"swFCPortScn
1.3.6.1.4.1.1588.2.1.1.1.0.3"
page 156
"swEventTrap
1.3.6.1.4.1.1588.2.1.1.1.0.4"
page 157
"swFabricWatchTrap
1.3.6.1.4.1.1588.2.1.1.1.0.5"
page 157
"swTrackChangesTrap
1.3.6.1.4.1.1588.2.1.1.1.0.6"
page 158
"swIPv6ChangeTrap
1.3.6.1.4.1.1588.2.1.1.1.0.7"
page 159
"swPmgrEventTrap
1.3.6.1.4.1.1588.2.1.1.1.0.8"
page 159
"swFabricReconfigTrap
1.3.6.1.4.1.1588.2.1.1.1.0.9"
page 159
154
swIPv6ChangeTrap 1.3.6.1.4.1.1588.2.1.1.1.0.7
swPmgrEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.8
swFabricReconfigTrap 1.3.6.1.4.1.1588.2.1.1.1.0.9
swFabricSegmentTrap 1.3.6.1.4.1.1588.2.1.1.1.0.10
swExtTrap 1.3.6.1.4.1.1588.2.1.1.1.0.11
Table 14 for the eleven traps defined in the SW-MIB, when it occurs, and how to configure
Specific When
1 Obsolete
on
2 Obsolete
on
3 Port changes state
on
4 Switch event
on
5 Threshold reached
on
6 Log in/log out
on
7 This trap is generated when an IPv6
on address status change event occurs. It is
generated only when IPv6 stateless state
to deprecation state and not for just
address change notification.
8 This trap is generated when:
•
on
Logical switch is created or deleted.
•
Port is moved between logical
switches.
•
Switch FID changes.
•
Any logical switch is changed to base
switch.
•
VF is enabled or disabled.
9 The trap to be sent for tracking fabric
on reconfiguration.
Configure
N.A.
N.A.
Always on
Refer to the Fabric OS Command Reference
and the snmpConfig command for more
information.
Fabric OS Command: fwConfigure
portthconfig, thconfig, sysmonitor --config
Fabric OS Command: trackChangesSet and
trackChangesShow
Refer to the Fabric OS Command Reference
and the snmpConfig command for more
information.
Refer to the Fabric OS Command Reference
and the snmpConfig command for more
information.
Refer to the Fabric OS Command Reference
and the snmpConfig command for more
information.
Fabric OS MIB Reference
53-1001768-01