Brocade Communications Systems 8 Reference Manual page 127

A management station might place the Fx_Port in a desired state by setting this object accordingly.
The testing state (3) indicates that no operational frames can be passed. When a fabric element
initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the offline state (2). As the result of
either explicit management action or per configuration information accessible by the fabric
element, fcFxPortPhysAdminStatus is then changed to either the online (1) or testing (3) states or
remains in the offline state (2).
fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.4
The current operational status of the Fx_Port:
•
•
•
•
The testing state (3) indicates that no operational frames can be passed. If
fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2). If
fcFxPortPhysAdminStatus is changed to online (1), then fcFxPortPhysOperStatus should change to
1 (online) if the Fx_Port is ready to accept fabric login request from the attached Nx_Port; it should
proceed and remain in the link-failure state (4) if and only if there is a fault that prevents it from
going to the online state (1).
fcFxPortPhysLastChange 1.3.6.1.3.42.2.1.2.3.1.5
The value of sysUpTime at the time the Fx_Port entered its current operational status. A value of 0
indicates that the Fx_Port's operational status has not changed since the agent last restarted.
fcFxPortPhysRttov 1.3.6.1.3.42.2.1.2.3.1.6
The Receiver_Transmitter_Timeout value of the Fx_Port. This is used by the receiver logic to detect
Loss of Synchronization.
Fx_Port Fabric login table
This table contains one entry for each Fx_Port in the fabric element, and the Service Parameters
that have been established from the most recent fabric login, whether implicit or explicit.
fcFxlogiTable 1.3.6.1.3.42.2.1.2.4
A table that contains, one entry for each Fx_Port in the fabric element, services parameters
established from the most recent fabric login, explicit or implicit.
fcFxlogiEntry 1.3.6.1.3.42.2.1.2.4.1
An entry containing service parameters established from a successful fabric login.
Fabric OS MIB Reference
53-1001768-01
online (1) Log in might proceed.
offline (2) Log in cannot proceed.
testing (3) Port is under test.
link-failure (4) Failure after online/testing.
fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.4
3
109