Brocade Communications Systems 8 Reference Manual page 84

Fabric os mib reference
Hide thumbs Also See for 8:
Table of Contents

Advertisement

2
ifHCOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.12
ifHCOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.12
The total number of packets that higher-level protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer, including those that were discarded or not sent.
For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit
version of ifOutMulticastPkts. Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times as indicated by the value of
ifCounterDiscontinuityTime
Not supported.
ifHCOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.13
The total number of packets that higher-level protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.
This object is a 64-bit version of ifOutBroadcastPkts. Discontinuities in the value of this counter can
occur at re-initialization of the management system, and at other times as indicated by the value of
ifCounterDiscontinuityTime.
Not supported.
ifLinkUpDownTrapEnable 1.3.6.1.2.1.31.1.1.1.14
Indicates whether linkUp or linkDown traps should be generated for this interface. By default, this
object should have the value enabled (1) for interfaces which do not operate on any other interface
(as defined in the ifStackTable), and disabled (2) otherwise.
ifHighSpeed 1.3.6.1.2.1.31.1.1.1.15
An estimate of the current operational speed of the interface in millions of bits per second. A unit of
1000 equals 1,000,000 bps. For 1 Gbps, the value is 1000, for 2 Gbps, the value 2000, etc.
ifPromiscuousMode 1.3.6.1.2.1.31.1.1.1.16
This object has a value of false(2) if this interface only accepts packets or frames that are
addressed to this station. This object has a value of true(1) when the station accepts all packets or
frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal,
setting this object to a value of true(1) may require the interface to be reset before becoming
effective. The value of ifPromiscuousMode does not affect the reception of broadcast and
multicast packets or frames by the interface.
Hard-coded to false.
ifConnectorPresent 1.3.6.1.2.1.31.1.1.1.17
Set to true when media is connected, otherwise false. For virtual FC ports, it is always false.
66
Fabric OS MIB Reference
53-1001768-01

Advertisement

Table of Contents
loading

Table of Contents