Trunking Group - Brocade Communications Systems 8 Reference Manual

5
swBlmPerfFltAlias 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.4
swBlmPerfFltAlias 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.4
Alias name for the filter.

Trunking group

swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1
Whether the switch supports the trunking feature or not: no (0) or yes (8).
swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2
Displays trunking information for the switch.
For the Brocade 4100, cc ports per trunk are supported.
swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1
Entry for the trunking table.
Index swTrunkPortIndex
swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1
This object identifies the switch port index.
The value of a port index is extracted from the second octet of the port WWN stored in
swFCPortWwn (refer to
Group).
swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2
This object is a logical entity that specifies the group number to which the port belongs. If this value
is 0, the port is not trunked.
swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3
Port number that is the trunk master of the group. The trunk master implicitly defines the group. All
ports with the same master are considered to be part of the same group.
swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4
The active trunk status of the member port. Values are enabled (1) or disabled (0).
200
swFCPortWwn 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 in the Fibre Channel Port
Fabric OS MIB Reference
53-1001768-01